Changing The Setting Of Paper Size - Toshiba e-Studio 232 Operator's Manual

4.Setting Copy Paper (Cont.)

Changing the setting of paper size

1
If the setting of the paper size registered in the equipment does not correspond to the one in the drawer, it
could cause a paper jam. In this case, change the setting of the paper size according to the following pro-
cedure.
1
Press the [USER FUNCTIONS] button on
the control panel.
2
Press the [USER] button on the touch panel to enter the user setting
menu and then press the [DRAWER] button.
3
Press the drawer on the touch panel corresponding to the one in
which the paper size has been set, and then press the button indicat-
ing the new one.
50
1.BEFORE USING EQUIPMENT