Changing the ringer tone
You can change the ringer tone that is heard when receiving calls from the door station or the camera (optional).
(The ringer tone of the paging call cannot be changed.)
You can perform this operation using the main monitor station.
LThe default settings are: Door station 1 "TONE 1", Door station 2 "TONE 2", Camera 1 – 4 "TONE A"
1
During standby, press and hold {SET} for about 3 seconds.
2
Select "OTHER" by pressing {▼} or {▲}.
3
Press {D} then select "RINGER TONE" by pressing {▼} or {▲}.
4
Press {D} then select the desired device to change by pressing {▼} or {▲}.
5
Press {D} then select the desired ringer tone by pressing {▼} or {▲}.
L� P ress {►} to listen to the ringer tone.
6
Press {D}.
L� " l" moves to the selected item.
7
To end the operation, press {OFF}.
Programming
FUNCTION SETTINGS/OTHER
TIME AND DATE
RINGER TONE
RINGER SELECTION
CONTACT CLOSURE SELECTION
EXTERNAL DEVICE
DOOR STATION CONNECTION
DOOR KEY
DOOR STATION AUTO RECORDING
PICTURE RECORD ALLOCATION
BACK
OK
↓
(Returns to the display of step 4.)
1/2
43