Changing The Ringer Tone - Panasonic VL-SW251BX Operating Instructions Manual

Programming

Changing the ringer tone

You can change the ringer tone that is heard when receiving calls from the door station by using the main
monitor station or the sub monitor station. (The ringer tone of the paging call cannot be changed.)
Main monitor station
1
Press {MENU}, then select "RING TONE
SETTINGS" by pressing {VOLUME} ( ) or
{PAGE} (▲).
2
Press {MENU} (OK), then select "RING TONE" by
pressing {VOLUME} ( ) or {PAGE} (▲).
3
Press {MENU} (OK), then select the desired door
station by pressing {VOLUME} ( ) or
{PAGE} (▲).
DOOR STATION 1
DOOR STATION 2
4
Press {MENU} (OK), then select the desired ringer
tone by pressing {VOLUME} ( ) or {PAGE} (▲).
RING TONE/DOOR STATION 1
●
SOUND 1
SOUND 1 (REPEAT)
Current
SOUND 2
SOUND 2 (REPEAT)
setting
L T he selected ringer tone sounds.
L T he ringer tone sounds just once in this step
even if you select "(REPEAT)".
5
Press {MENU} (OK).
L " r" moves to the selected item.
6
To end the operation, press {OFF}.
N
Ringer tone patterns
The default settings are: Door station 1 "SOUND 1", Door station 2 "SOUND 2"
Ringer tone for calls from the door station
SOUND 1
SOUND 1 (REPEAT)
SOUND 2
SOUND 2 (REPEAT)
SOUND 3
SOUND 3 (REPEAT)
1
*
The selected tone rings about every 5 seconds. However, the ringer tone heard at the door station or the
ringer tone when receiving another call does not ring repeatedly.
34
1
*
1
*
1
*
Sub monitor station
1
Press {MENU}, then select "RING TONE" by
pressing { } or {▲}.
2
Press {D} (OK), then select the desired door
station by pressing { } or {▲}.
DOOR 1
DOOR 2
3
Press {D} (OK), then select the desired ringer tone
by pressing { } or {▲}.
TONE/DOOR1
SOUND1
●
SOUND1 REPEAT
Current
SOUND2
setting
SOUND2 REPEAT
L T he selected ringer tone sounds.
L T he ringer tone sounds just once in this step
even if you select "REPEAT".
4
Press {D} (OK).
L " r" moves to the selected item.
5
To end the operation, press {OFF}.
1/6