Table of Contents
Advertisement
6.1 Alarm features overview
Devices and notifications
Commercially available push buttons and sensors can
be connected to the room monitor, such as a doorbell,
emergency button, gas leak sensor, water leak sensor,
etc. When one of these devices is triggered, the room
monitor responds accordingly. For example, if a doorbell
is pressed, the room monitor sounds a chime and
displays a notification; if a gas leak sensor is triggered,
the room monitor sounds an alarm, displays a
notification, and also notifies facility staff.
Alarm features 1–6
Up to 6 devices can be connected to the room monitor.
Each device is used to trigger the corresponding alarm
feature.
– Device 1: Urgency button, triggers alarm feature 1.
– Device 2: Emergency button, triggers alarm feature
2.
– Device 3: Doorbell, triggers alarm feature 3.
– Devices 4–6: Triggers alarm features 4–6. Set the
"Device Type" setting to match the type of device
that is connected (6.4 Changing alarm feature
settings (Page 20)).
Arm modes
Alarm features are enabled or disabled based on the
current arm mode. There are 4 different arm modes, and
you can determine which alarm features are enabled for
each. In order to enable or disable different alarm
features during different times of the day, you can
change the arm mode before you leave your residence,
when you come home, before you go to bed, etc. You
can also disarm (disable) the room monitor's alarm
features.
6.2 Changing the arm mode
Arming the system
1. From the home screen, tap the current arm mode
(displayed in the lower-right corner of the display).
2. Select the desired arm mode.
– "Out": This arm mode is suggested for use when
no one is home.
– "At Home": This arm mode is suggested for use
when you are home, but want to keep some alarm
features enabled.
– "Sleep": This arm mode is suggested for use
when you are home and sleeping.
– "Custom": This arm mode has no particular
suggested use.
3. Enter the arm/disarm password, tap outside of the
on-screen keypad to close it, and then tap "OK".
R The arm mode is changed, and your alarm
features are enabled or disabled according to
their settings for the current arm mode.
R The default arm/disarm password is "123456".
R This password is determined by the "Arm/
Disarm PW" setting (8.1 Changing the room
monitor's settings (Page 23)). We recommend
changing this and all passwords regularly.
Disarming the system
1. From the home screen, tap the current arm mode
(displayed in the lower-right corner of the display).
2. Enter the arm/disarm password, tap outside of the
on-screen keypad to close it, and then tap "OK".
R "Arm:Off" is selected and all alarm features are
disabled.
R The default arm/disarm password is "123456".
R This password is determined by the "Arm/
Disarm PW" setting (8.1 Changing the room
monitor's settings (Page 23)). We recommend
changing this and all passwords regularly.
6. Alarm features
19
Hide quick links:
Advertisement
Table of Contents
