Toshiba RAV-SM563UT-E Service Manual page 130

Split type
Hide thumbs Also See for RAV-SM563UT-E:
Table of Contents

Advertisement

Toshiba SDI / DI tuotteiden jälleenmyyjä pääkaupunkiseudulla on Jäähdytinpalvelu RefGroup Oy
14-1-3. Under Ceiling Type
RAV-SM562CT-E, RAV-SM802CT-E, RAV-SM1102CT-E, RAV-SM1402CT-E
Be sure to turn off the power supply or circuit breaker before disassembling work
No.
Part name

Suction grille
1. Slide the suction grille fixing
2. Under the condition of the
Side panel
1. Open the suction grille.
2. After removing the side panel
ƒ
Electrical
1. Remove the suction grille.
parts box
2. Loosen the set screws (2 posi-
3. Remove the electrical parts
4. Remove the set screws
5. Remove the electrical parts box.
In this time, remove connectors of
TA sensor, TC sensor and TCJ
sensor if necessary.
Procedure
knobs (2 positions) toward the
arrow direction of left figure, and
open the suction grille.
suction grille opened, push the
hook section of hinges (2 posi-
tions) at the rear side, and then
pull out the suction grille.
screws (2 positions), slide the
side panel forward and then
remove it.
tions) of the electrical parts
cover.
cover.
(2 positions) of the electrical
parts box.
www.ilmalämpöpumput.com
Hinge
Suction grille
fixing knob
Side panel
Slide forward.
Electrical parts cover
Screws
(Fixing electrical parts cover and box)
Screws
(Fixing electrical parts box and main unit)
– 130 –
Remarks
Pull out suction grille
while pushing hook.
Suction grille
Protector
Level flap
3 -2
3 -3
3 -4
3 -5
Electrical parts box
Electrical par
Electr
ical parts bo
ts box

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents