Toshiba RAV-SM563UT-E Service Manual page 128

Toshiba SDI / DI tuotteiden jälleenmyyjä pääkaupunkiseudulla on Jäähdytinpalvelu RefGroup Oy
No. Part name
ƒ
Fan motor 1. Remove the Multi blade fan.
2. Remove the hexagon head screw of fixing
3. Remove the fan motor holder
„
Drain pan 1. Take down the main unit and then treat
2. Remove the set screws (562 : 7, 802,
3. Remove the lower plate from main unit.
4. Remove the set screws (562 : Nothing,
5. Remove the drain pan holder (562 :
6. Remove the drain pan.
…
Float switch 1. Remove the drain pan.
2. Remove the set screw (1 position) of
3. Remove the plastics nut of foxing float
4. Remove the float switch.
Procedure
fan motor holder.
(2 positions).
the drain pan on the floor.
1102, 1402 : 9 positions) of fixing lower
plate.
802 : 2 positions, 1102, 1402 : 4 positions)
of fixing drain pan holder and main unit.
Nothing, 802 : 1 position, 1102, 1402 : 2
positions) from main unit.
Pull it lower side.
fixing float switch holder.
switch.
www.ilmalämpöpumput.com
Screws (Fixing drain pan holder)
Float switch
Float switch holder
– 128 –
Remarks
Fan motor
Fan motor holder
Screws
(Fixing fan motor holder)
Screws (Fixing lower plate)
Lower plate Screws
(Fixing drain pan holder)
Drain pan holder Drain pan
Float switch holder
Screw
(Fixing float switch holder)
Float switch (View from reverse side)
Plastic nut
3 -2
3 -3
4 -2
4 -3
4 -4
4 -5
5 -2
5 -3