InFocus LP1200 User Manual page 28

PC-CARD (Continue)
To automatically change the image, follow the steps
as shown below.
1. Press the MENU button.
SIGNAL PICTURE
2. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select PC
CARD AUTO PLAY.
SIGNAL PICTURE
3. Press the ª or º buttons on the control panel (or
{ or } buttons on the remote control).
PinP/
SIGNAL PICTURE
EXPAND
4. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select
AUTO SLIDE TIME.
PinP/
SIGNAL PICTURE
EXPAND
5. Press the ª or º buttons on the control panel (or
{ or } buttons on the remote control) to set the
time for auto playback.
PinP/
SIGNAL PICTURE
EXPAND
6. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select
REPEAT.
PinP/
SIGNAL PICTURE
EXPAND
7. Press the ª or º buttons on the control panel (or
{ or } buttons on the remote control) to select ON
or OFF.
PinP/
SIGNAL PICTURE
EXPAND
8. Press the MENU button twice to exit the menu sys-
tem.
9. Press the CARD button repeatedly until PC-1 (or
PC-2) appear on the screen.
10. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select the
desired image.
28
PinP/ PC CARD
EXPAND AUTO PLAY
PinP/ PC CARD
EXPAND AUTO PLAY
AUTO SLIDE
REPEAT ICON
TIME
ON ON
10 sec.
OFF OFF
PC CARD
AUDIO INSTALLATION
AUTO PLAY
AUTO SLIDE
REPEAT ICON
TIME
ON ON
10 sec.
OFF OFF
PC CARD
AUDIO INSTALLATION
AUTO PLAY
AUTO SLIDE
REPEAT ICON
TIME
ON ON
30 sec.
OFF OFF
PC CARD
AUDIO INSTALLATION
AUTO PLAY
AUTO SLIDE
REPEAT ICON
TIME
ON ON
30 sec.
OFF OFF
PC CARD
AUDIO INSTALLATION
AUTO PLAY
AUTO SLIDE
REPEAT ICON
TIME
ON ON
30 sec.
OFF OFF
PC CARD
AUDIO INSTALLATION
AUTO PLAY
11. Press the AUTO PLAY button on the remote con-
trol.
The image automatically changes according your
setting.
12. Press the AUTO PLAY button on the remote con-
trol to quit the PC-CARD automatic playback func-
tion.
• A gray frame will appear during auto play.
• Button operation will only work when the gray
frame appears on screen. Button operation is not
possible while the red frame is on-screen.
• When projecting images in 2-screen display mode,
the screen will momentarily go black when images
inputted via PC card are updated.
• Auto play can be stopped by pressing any button
(including SELECT, DOUBLE CLICK, CANCEL,
and START/STOP).
• Auto play cannot be used either during image
enlargement or when menus are displayed.