InFocus LP1200 User Manual page 20

Menu operation (continue)
E PinP/EXPAND
This menu appears when either the display enlargement or PinP functions are used.
ZOOM
POSITION
MODE
1
1
2
2
3
3
4
4
5
PinP/ PC CARD
SIGNAL PICTURE
EXPAND AUTO PLAY
ZOOM MODE ..... Selects the desired type of expand mode, type1, 2, 3 or 4 (actual size display).
POSITION .......... Selects the desired position of the sub image in expand or PinP mode.
SIZE .................... Selects the desired size of the sub image in expand or PinP mode.
AUTO PIP ........... Sets to move the position of PinP pictures automatically or not, when it appears on the red
frame which shows the PinP part.
R PC CARD AUTO PLAY
AUTO SLIDE
TIME
33 sec.
PinP/ PC CARD
SIGNAL PICTURE
EXPAND AUTO PLAY
AUTO SLIDE
TIME ................... Sets the length of time before the image switches to the next image in PC CARD automatic
playback mode.
REPEAT .............. Sets to repeatedly playback the PC CARD presentation or not in PC CARD automatic
playback mode.
ICON ................... Select wether to addition of card icon of PC card. Even the setting is OFF, if you press the PC
card end button on the remote control, the card icon will automatically appear.
T AUDIO
PinP/ PC CARD
SIGNAL PICTURE
EXPAND AUTO PLAY
VOLUME ............ Adjusts the volume of sound. The volume becomes louder as the number increases.
MUTE .................. Use to set MUTE on or off. Select ON to switch off the sound. Select OFF to switch the sound
back on.
Y INSTALLATION
PinP/ PC CARD
SIGNAL PICTURE
EXPAND AUTO PLAY
IMAGE REVERSE Use to reverse or invert the projected image. MIRROR is used for rear projection. INVERT
is effective when the projector is ceiling-mounted.
KEYSTONE ........ Adjusts keystone correction of the image. If the image becomes keystone distortion, select
the approximate setting. For normal use, select 0˚. You can use it only when IMAGE
REVERSE is OFF.
AUTO POWER ON .... To select wether to boot up automatically when the power is turned on by a breaker. In this
case, the main power of the projector has to be ON. Set this when the projector is hanging on
the ceiling.
• The projector is in stand-by mode when the lamp does not come on. In this case, use the
TEST SIGNAL .... Use to display the built-in test pattern on the screen.
• The display will disappear when the setting is OFF or press the button except MENU,
20
AUTO
SIZE
PIP
1 ON
2 OFF
3
AUDIO INSTALLATION OPTION
REPEAT ICON
ON ON
OFF OFF
AUDIO INSTALLATION OPTION
VOLUME MUTE
30
ON
OFF
AUDIO INSTALLATION OPTION
IMAGE AUTO
KEYSTONE
REVERSE POWER ON
OFF 0˚ ON
3˚ OFF
MIRROR
6˚
INVERT 9˚
12˚
MIRROR,
INVERT 15˚
AUDIO INSTALLATION OPTION
remote control to turn on the lamp.
ZOOM/FOCUS, ª , º , { ,}and START/STOP.
Ver.
Ver.
Ver.
TEST
SIGNAL
OFF
1
2
3
4
Ver.