GE Profile UPSE810 Use And Installation Manual page 14

RECONNECTING GAS
14
NEW METAL
FLEXIBLE GAS
LINE CONNECTOR
ADAPTER
3/8" NPT
ELBOW
ITEMS NOT SUPPLIED
APPLY PIPE COMPOUND
TO THE ADAPTER AND
DRYER GAS INLET.
TIGHTEN THE FLEXIBLE
GAS LINE USING TWO
ADJUSTABLE WRENCHES.
ADAPTER
1/8" NPT PIPE
PLUG FOR
CHECKING GAS
INLET PRESSURE
SHUT-OFF
VALVE
PIPE SIZE
AT LEAST 1/2"
LEAK TEST
15
WARNING - NEVER USE AN OPEN
FLAME TO TEST FOR GAS LEAKS.
OPEN
GAS VALVE.
Check all connections for leaks with soapy solution or
equivalent. Apply soap solution. Leak test solution must
not contain ammonia which could cause damage to the
brass fittings. If leaks are found, close valve, retighten the
joint, and repeat the soap test.
14
APPLY PIPE COMPOUND
TO ALL MALE THREADS.
TIGHTEN ALL CONNECTIONS
USING TWO ADJUSTABLE WRENCHES.
DO NOT OVER TORQUE GAS CONNECTIONS!