Menu 2 Functions - InFocus LitePro 560 User Manual

Using the LitePro

Menu 2 Functions

Rear Projection
When you select Rear Projection, the LitePro reverses the image so
you can project from behind the screen as shown here.
To enable or disable to rear projection mode:
1. Press the
2. Use the right or left arrow buttons to highlight "Menu 2".
3. Press
4. Use the right or left arrow buttons to highlight "Rear Projection".
5. Press
Source Prompt
When you are displaying your presentation and you press
enter
the active source. If you don't want this display, follow the steps
below to disable the Source Prompt.
To enable or disable the Source Prompt:
1. Press the
2. Use the right or left arrow buttons to highlight "Menu 2".
3. Press
4. Use the right or left arrow buttons to highlight "Source Prompt".
5. Press
28
button to display Menu 1.
menu
select/enter to display Menu 2.
to enable Rear Projection. The image
select/enter
immediately changes to display the mirror image. (Press
again to change it back.)
enter
to switch sources, the LitePro momentarily displays the name of
button to display Menu 1.
menu
select/enter to display Menu 2.
to enable or disable the Source Prompt.
select/enter
select/
select/
LitePro 560/570 User's Guide