InFocus LitePro 560 User Manual page 29

Using the LitePro
arrow buttons
The operations of the arrow buttons depend on what is displayed.
When a menu is displayed, the left and right arrow buttons move the
highlight bar to select a menu function. The up and down arrow
buttons adjust or change the value of the highlighted function. The
arrow buttons are auto-repeating; they repeat their function as long
as you hold down the button.
When a computer or video image is displayed, the left and right
arrow buttons perform their alternate functions, mute and mic . These
are described below.
LP 560LS & LP 570LS: When a LiteShow presentation is displayed,
the up and down arrow buttons perform their alternate functions,
and . These are described below.
next prev
select/enter
The operation of the button also depends on what is
select/enter
displayed. When Menu 2 or the Audio Menu is displayed,
select/
cycles forward through the available settings for the
enter
highlighted function.
When a computer or video image is displayed, select/enter switches
among the sources that are connected and enabled, such as
computer(s) in Source 1 and/or 2 and video player(s) in Source 3
and/or 4. If only one source is connected, switches
select/enter
between the source image and the test pattern. If the test pattern is
turned off, switches between the source image and a
select/enter
blank screen. (Connecting sources is described starting on page 5.
Enabling sources is described on page 31. Turning off the test pattern
is described on page 29. Video players can only be connected to the
LitePro 570.)
LP 560LS & LP 570LS: When a LiteShow presentation is displayed,
the button has a different function. Refer to the LiteShow
select/enter
User's Guide for more information.
next
LP 560LS & LP 570LS: When a LiteShow presentation is displayed,
press to advance to the next slide in your presentation. Refer to
next
the LiteShow User's Guide for more information.
LitePro 560/570 User's Guide 21