Replacing An Active Air Clean Filter Or An Active Hepa Filter - Miele S 6710 Operating Instructions Manual

Maintenance and care
Replacing an Active Air Clean
filter or an Active HEPA filter
Do not use more than one exhaust
filter at a time.
^ Open the dust compartment lid.
^ Remove the exhaust filter.
^ Fit the new exhaust filter in position.
If you wish to use an Air Clean filter,
see "Replacing one type of exhaust
filter with another".
^ Close the dust compartment lid
firmly. It should click into place.
Re-setting the exhaust filter change
indicator (reset button [)
The filter change indicator (reset button
[) must be reset each time the exhaust
filter is replaced. To do this the vacuum
cleaner must be connected to the
electricity supply.
^ Press the reset button [.
The exhaust filter change indicator will
go out and reset to zero.
The filter change indicator can only
be reset by pressing the reset
button after the light has come on.
Pressing the button at any other time
will have no effect.
28