Panasonic EY7540-X8 Service Manual page 5

Procedure 1A → → → → 1B → → → → 1C→ → → → 1D
Ref. No. 1D Removal and attachment of the Switch.
1. Take out the switch assembly from the housing.
(Attachment)
1. Connect the motor lead wires.
2. Insert the connectors into the FET, the main PCB and the motor
stator.
NOTE :
Make sure to handle the ribbon cable gently in order to avoid the
breakage.
Apply the grease (FLOIL) on the places where insert into the
connectors.
5
EY7540-X8 /