Table of Contents
Advertisement
To launch this function, click on the Windows Start button, then select Programs, then
NETGEAR ProSafe VPN Client, then Log Viewer. The Log Viewer screen for a successful
connection is shown below:
Figure 8-15
Note: Use the active VPN tunnel information and pings to determine whether a failed
connection is due to the VPN tunnel or some reason outside the VPN tunnel.
9. The Connection Monitor screen for this connection is shown below:
Figure 8-16
In this example you can see the following:
•
The DG834GSP has a public IP WAN address of 22.23.24.25.
•
The DG834GSP has a LAN IP address of 10.1.3.1.
•
The VPN client PC has a dynamically assigned address of 10.1.2.2.
Virtual Private Networking
Reference Manual for the ADSL Modem Wireless Router DG834GSP
10.1.3.1
v1.0, June 2007
8-19
Advertisement
Table of Contents
Troubleshooting
