NETGEAR DG834GSP Reference Manual page 125

b. From the Edit menu of the Security Policy Editor, click Add, then Connection.
Figure 8-9
A "New Connection" listing appears in the list of policies. Rename the "New Connection"
so that it matches the Connection Name you entered in the VPN Settings of the
DG834GSP on LAN A.
Note: In this example, the Connection Name used on the client side of the VPN
Tip: Choose Connection Names that make sense to the people using and
c. Select Secure in the Connection Security check-box group.
d. Select IP Subnet in the ID Type menu.
e. In this example, type 10.1.3.1 in the Subnet field as the network address of the
DG834GSP.
f. Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the DG834GSP.
g. Select All in the Protocol menu to allow all traffic through the VPN tunnel.
Virtual Private Networking
Reference Manual for the ADSL Modem Wireless Router DG834GSP
10.1.3.1
tunnel is toDG834 and it does not have to match the RoadWarrior
Connection Name used on the gateway side of the VPN tunnel because
Connection Names are arbitrary to how the VPN tunnel functions.
administering the VPN.
v1.0, June 2007
8-13