2
Getting started
2.1
Set-up
Removing and installing the back cover
Removing and installing the battery
Inserting and removing the SIM card
Inserting and removing the TF card
Charging the battery
IP4514_ALCATEL 1060_QG_Eng_GB_14_130325.indd 5-6
IP4514_ALCATEL 1060_QG_Eng_GB_14_130325.indd 5-6
Connect the battery charger to your phone and mains socket
............
respectively.
•
The charging may take about 20 minutes to start if the
battery is flat.
•
Be careful not to force the plug into the socket.
•
Make sure the battery is correctly inserted before
connecting the charger.
•
The mains socket must be near to the phone and easily
accessible (avoid electric extension cables).
•
When using your telephone for the first time, charge the
battery fully (approximately 3 hours). You are advised to
fully charge the battery (
•
To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from the
plug; reduce the backlight time, etc.
2.2
Hold down the
2.3
Hold down the
5
).
The charge is complete when the animation stops.
Power on your phone
key until the phone powers on.
Power off your phone
key from the idle screen.
6
2013-3-25 11:30:23
2013-3-25 11:30:23