Installing The Power Supply - Fujitsu Siemens Computers SCENIC Edition X100 Operating Manual

Installing the power supply

1
► Tilt and turn the power supply unit (1) so that you can place the power supply in the casing.
Watch the guide rails when doing so.
► Firmly press the power supply in the direction of the arrow (2) to deactivate locking of the
power connections.
► Fasten the knurled screws (3) on the side of the power supply.
► Then fasten the knurled screws (4) on the rear of the chasing.
A26361-K678-Z121-1-7619, edition 1
3
System expansions
2
4
51