Maintenance And Storage - Omron HCG-801 Instruction Manual

HCG-801-E.book Page 51 Tuesday, December 13, 2011 5:35 PM

11. Maintenance and Storage

• Clean the unit with a cloth lightly dampened with
water, disinfectant alcohol or detergent, then wipe
it dry with a dry cloth. Do not wipe the SD memory
card slot cover.
• Wipe the electrodes using a cloth dampened with
disinfectant alcohol.
• Do not wipe the unit with benzene, gasoline, paint
thinner, concentrated alcohol, or other volatile
detergents.
• Do not place objects on top of the unit. This could
damage the unit.
• Do not disassemble the unit. There are no user
serviceable parts. Repairs should only be carried
out by authorized personnel.
• Do not sterilise this unit in an autoclave, ultraviolet
steriliser or gas steriliser (EOG, formaldehyde,
high density ozone etc.)
• This device does not require calibration during the
expected life cycle of five years.
11. Maintenance and Storage
EN
51