Remote Operation - Panasonic KX-PRX120AZ Operating Instructions Manual

Answering a new message notification call
1
When the base unit calls the outside phone number you specified, answer the call and enter
the remote code if prompted to do so.
2
Follow the voice guidance prompts as necessary or control the unit using remote commands
(page 35).
3
When finished, hang up.
Standard remote access
Important:
R You must set the remote access code in order to use standard remote access (page 37).
1
Dial your phone number from a touch-tone phone.
2
After the greeting message starts, enter the remote access code.
3
Follow the voice guidance prompts as necessary or control the unit using remote commands
(page 35).
4
When finished, hang up.
Voice guidance
During remote operation, the unit's voice guidance starts and prompts you to press 1 to perform
a specific operation, or press 2 to listen to more available operations.
Note:
R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit
disconnects your call.

Remote operation

You can press dial keys to operate answering system features as explained below.
Key Operation
1
Repeat message (during playback)
2 Skip message (during playback)
4 Play new messages
5 Play all messages
6 Play greeting message
7 Record greeting message
9 Stop recording or playback
0 Turn answering system off
#9 Turn new message notification off
*4 Erase currently playing message
*5 Erase all messages
Answering System Features (KX-PRX120 only)
*1
35