Oil; Gear Box Oil Lever And Replace The Gear Oil - Generic Trigger X User Manual

Table of Contents

Advertisement

Oil

When the oil indicator is on, please fill oil into the sump.
As the right picture shows with a little pull,
You can open the sump cap.
CAUTION:
Only use the oil of you authorized Generic Dealer. Only use
the right 2-Stroke engine oil. CASTROL Power 1 Racing

Gear box oil lever and replace the gear oil

gear oil level
Before start the engine, please check the gear oil level.
When check the gear oil level ,let the motorcycle stand on
flat, oil lever should between maximum and minimum level,
add SF lever SAE 85W90 gear oil to the maximum level if
required.
CAUTION
IT is easier to drain the engine oil when the engine is warm.
1.
First remove the cap of the oil hole.
2.
Screw bolt under the engine to drain the old oil.
3.
Kick the engine some times to drain the oil cleanly
4.
Add the proper oil,observing the lever, to the
maximum lever.
5.
Fix the cap.
6.
Start the engine,Let the engine rotate a few
minutes under idle conditions, then switch off the
engine.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trigger sm

Table of Contents