Key Point Of Driving; Starting The Engine; Driving The Motorcycle; Use The Gear Changing System - Generic Trigger X User Manual

Key point of driving

Starting the engine

Check whether or not the fuel switch is on the position of " ", put the key into the switch and turn the
position of " ", let the transmission gear on the zero position and the neutral indicator is on.
When engine is cold set the choke on the close position, use the kick-starter or the electric starter to start
the engine. Then set the choke on the midway position in order to warm the engine. At last set the choke
on the open position, if the engine operates smoothly, it implies the warmed engine.
When engine is warm open the accelerograph 1/8—1/4turn, start the engine .In that case, it is no need use
the choke system.
WARNING
Don't start the engine in an airless or air tight room.Don't leave your motorcycle unattended, especially not
with the engine ON or the key inserted.
CAUTION:
When no driving, don't let your motorcycle operate excessly, or less it will become very hot, in that situation,
the parts of the engine may be damaged.

Driving the motorcycle

Grip the clutch handle, stay for a moment and kick the gear lever adown to the first gear. Turn the steering
handle towards the diver, at the same time, undo the clutch handle, the motorcycle will move.

Use the gear changing system

Gear changing system can make the engine running at the normal range .The driver should chose the right
speed according the situation and let the engine running at the normal range rather than change the clutch
in order to increase the speed.