Setup Mode - Minolta Dimage S304 Instruction Manual

PLAYBACK MODE
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out
terminal to make the connection using the supplied AV cable. The camera is compatible
with the NTSC and PAL standards. The video-output setting can be checked and set in
the custom 2 section of the setup menu (p. 84).
1. Turn off the television and the camera.
2. Insert the mini-plug end of the AV cable into the
camera's video-out terminal.
3. Plug the other end of the AV cable into the video
and audio input terminals on the television.
• The yellow plug is for the video output. The white
plug is for the monaural audio output.
• The audio output will also be heard through the
camera's speaker while connected to a television.
4. Turn the television on.
5. Change the television to the video channel.
6. Turn the camera's mode dial to the playback
position.
• The camera's monitors will not activate when the
camera is attached to a television. The playback-
mode display will be visible on the television screen.
7. View images as described in the playback section.
82
2
3

SETUP MODE

CONTROLLING THE
CAMERA'S OPERATION
The setup mode is used to control the camera's functions and operation as well as to
select image folders. The navigating the setup menu section (p. 84) covers the opera-
tion of the menu. The section is followed by detailed descriptions of the settings.
83