Minolta Dimage S304 Instruction Manual page 41

PLAYBACK MODE
COPYING IMAGES
Image files can be copied from one CompactFlash card to another. Up to 8MB of data
can be transferred. Every time the copy function is used, a new folder is automatically
created for the images (p. 100). Images with voice memos are copied with their audio
files. Copies of locked images are unlocked (p. 75). DPOF information is not copied.
This frame - To copy the image displayed or highlighted in playback mode.
Marked frames - To copy single or multiple images. When selected, the frame-
selection screen will appear; highlight the image to be copied with the yellow border
and then press the up key of the controller to mark it with the check icon. To deselect
an image to be copied, highlight the selected image and press the down key; the check
icon will disappear. Continue until all the images to be copied are marked. Press the
controller to continue, or press the menu button to cancel the operation and return to
the playback menu.
When the controller is pressed, a screen with four messages will be displayed; the
messages are highlighted as the copying procedure is executed. When the change-CF-
card message is highlighted, remove the camera's CompactFlash card and insert the
card to which the image should be copied. Press the center of the controller to
continue. Wait until the copy-completed message is highlighted. A new screen will
appear to indicate the name of the new folder
containing the copied images; press the controller to
return to the playback menu.
If too many images have been selected, a warning will
appear and the copy routine will be canceled. Divide
the number of images into two or three batches. The
copy-unsuccessful message will appear when one or all
of the images could not be copied. Check the second
CompactFlash card to see which files were copied and
then repeat the procedure for the images that could not
be transferred.
80
Play Copy
Copying to camera memory
1
Change CF card
2
Copying to CF card
3
Copy completed
4
Enter
<101MLTCP>
OK
FRAME-SELECTION SCREEN
When a marked-frames setting is chosen on a menu, the frame selection screen will
appear. This screen allows multiple images to be chosen. The index format of the
screen can be changed in the basic section of the playback-mode menu (p. 72).
Play
The left/right keys
of the controller
move the yellow
border to select
the image.
Menu button
Cancels the
screen and any
: select
operation made.
The garbage-can icon indicates the image is selected for deletion.
The key icon indicates the image is locked or selected to be
locked.
The check icon indicates the image is selected for the slide show
or to be copied to another CompactFlash card.
The printer icon indicates the image is selected for printing. The
number next to the icon shows the number of copies requested.
The up key of the
controller selects
the frame; when
selected, an icon
will appear next to
the image. The
down key will
deselect the image
removing the icon.
: confirm : enter
81