Automatic White Balance; Preset White Balance; Custom White Balance - Minolta Dimage S304 Instruction Manual

MULTI-FUNCTION RECORDING
WHITE BALANCE
White balance is the camera's ability to make different types of lighting appear neutral.
The effect is similar to selecting daylight or tungsten film, or using color compensating
filters in conventional photography.
An icon will be displayed on the monitor if a setting other than auto white-balance is
chosen. White balance is set in the basic section of the multi-function recording mode
menu (p. 50).

AUTOMATIC WHITE BALANCE

The automatic white balance compensates for the color temperature of a scene. In
most cases, the AUTO setting will balance the ambient light and create beautiful
images, even under mixed-lighting conditions. When the built-in flash is used, the white
balance is set for the color temperature of the flash.

PRESET WHITE BALANCE

Preset white-balance settings must be set before the image is taken. Once set, the
effect is immediately visible on the LCD monitor.
The built-in flash can be used with preset white-balance settings, but will create a
pinkish or blueish cast with the fluorescent and tungsten settings. The flash is daylight
balanced and will produce acceptable results with the daylight and cloudy settings.
Cloudy For overcast outdoor scenes.
Daylight For outdoor and sunlit subjects.
For incandescent lighting: household filament light
Tungsten
bulbs.
Fluorescent For fluorescent lighting: office ceiling lights.
54

CUSTOM WHITE BALANCE

Custom-white-balance function allows a photographer to calibrate the camera to a
specific lighting condition. The setting can be used repeatedly until reset. Custom white
balance is especially useful with mixed-lighting conditions or when critical control over
color is needed. The object used to make a calibration should be white. A blank piece
of white paper is an ideal surface and can easily be carried in a camera bag.
To calibrate the camera, select the custom setting in the
white balance option in the basic section of the multi-
function recording mode menu; a window will open
asking you to choose "set" or "recall." Use the controller
to highlight "set" and then press the center of the
controller to enter the command; the custom white-
balance calibration screen will appear.
Fill the image area with a white object; the object does
not need to be in focus. Press the shutter-release button
to make the calibration. The custom setting will remain in
effect until another calibration is made or the white-
balance setting is changed.
If the custom white-balance setting needs to be used again,
select the custom setting on the basic section of the menu; a
window will appear. Highlight "recall" and press the controller to
enter the command; the last custom white-balance setting will
be applied to the camera.
Multi
Basic Custom1 Custom2
Exposure mode Cloudy
Ima
Select set or recall.
Qua
Whi Set Recall
Foc
Sensitivity Custom
M Custom WB set
Set WB with shutter button
Select set or recall.
Set Recall
55