Minolta Dimage X20 Instruction Manual page 17

Using strap A
Turn the strap eyelet so
that the strap A can
pass through it.(1)
2
1
Pass the small loop of strap A
through the strap eyelet on the
camera body (2).
Pass the other end of the strap through the
small loop and tighten (3).
3
1
Using both straps A and B
Pass the small loop of
strap B through the other
strap eyelet or the loop of
2
strap A (1).
Pass the end of strap B
through the link of the strap
A (2).
1
3
Pass the tip of strap B
through the buckle and pull
to tighten (3).
Slide the holder ring over
4
the tip (4).
17