Installing The Celeron Processor - Acer Power 6100 User Manual

7. Press the processor down until the golden fingers completely fit into the connector.
8. Snap the retention cover into place as shown in the figure below.
Figure 4-20 Installing the Celeron Processor
9. Connect the 3-pin and 2-pin fan/heatsink cables to FN1 and JP2 on the system board, respectively.
AcerPower 6100 (V66M/H61) User's Guide
cxvi
The heatsink becomes very hot when the
system is on. NEVER touch the heatsink with
any metal or with your hands.