Parallel Port - Acer Power 2100 User Manual

Base Address
This function lets you set a logical base address for the parallel port. The options are:
•
378h
•
278h
•
3BCh
IRQ
This function lets you assign an interrupt for the parallel port. The options are IRQ 5 and 7.
The Base Address and IRQ parameters are
configurable only if the Parallel Port is enabled.
If you install an add-on card that has a parallel port
whose address conflicts with the parallel port on
board, a warning message appears on the screen.
Check the parallel port address on the add-on card
and change the address to one that does not conflict.
Index
67