System Information - Acer Power 2100 User Manual

The system supports two BIOS Utility levels: Basic and Advanced. If you are an advanced user, you may want to
check the detailed configuration of your system. Detailed system configurations are contained in the Advanced
Level. To view the Advanced Level, press
The [F8] key works only when you are in the main
menu.
Advanced Level only when you are in the main
menu.
3.2

System Information

The following screen appears if you select System Information from the main menu.
System Information
Processor ...........................Pentium II
Processor Speed .....................350 MHz
Internal Cache .....................32 KB, Enabled
External Cache ......................512 KB, Enabled
Floppy Drive A ......................1.44 MB, 3.5-inch
Floppy Drive B ......................None
IDE Primary Channel Master ..........Hard Disk, xxxx MB
IDE Primary Channel Slave ...........IDE CD-ROM
IDE Secondary Channel Master ........None
IDE Secondary Channel Slave .........None
Total Memory ........................64 MB
1st Bank ..........................SDRAM, 32 MB
2nd Bank ..........................SDRAM, 32 MB
The System Information menu shows the current basic configuration of your system.
3.2.1 Processor
The Processor parameter specifies the type of processor currently installed in your system. The system supports
Pentium II and Celeron processors.
.
This means that you can activate the
Page 1/2
Index
55