Table of Contents
Advertisement
2.5
IDE Hard Disk Support
The board comes with an enhanced IDE controller that supports PIO mode 4 and Ultra DMA (Direct Memory
Access) mode data transfers. In addition, two EIDE interfaces are mounted on the system board supporting a
maximum of four IDE hard disks, or any other IDE devices. See Figure 2-1 for the location of the IDE interfaces.
Connect the cables according to the IDE hard disk configuration in Table 2-4.
Components, describes how to install a hard disk.
Table 2-4
IDE Hard Disk Configuration
IDE Connector
IDE1 (CN16)
IDE2 (CN18)
AcerPower 2100 (V66LT/IDB3-C) User's Guide
46
Master
Hard disk 0
Hard disk 1
Hard disk 2
Hard disk 3/
IDE CD-ROM drive
Chapter 4, Installing Optional
Slave
Advertisement
Chapters
Table of Contents
