Table of Contents
Advertisement
Convenient functions
Changing the unit's settings (Setup)
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
• To set the IP address and DNS
1 Set "IP Address Auto-assignment" and
"DNS-IP Auto-assignment" to "Off".
2 Select the item, then press [OK] to show
the respective setting.
• When the router's DHCP server function is
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the "IP
Address" and assign the same number for
"Subnet Mask" and "Gateway Address".
Proxy Server Settings
Check and set the connection to the Proxy
server.
• Press [OK] to show the respective setting.
Network Service Settings
Lock
You can restrict using VIERA Connect.
• PIN is required to change. (
Automatic Volume Control
Volume is adjusted automatically to the
standard volume while using VIERA
Connect.
• Depending on contents, this function will
not work.
• Select "Off" when the audio is warped.
72
VQT4G61
Home Network Settings
You can set the DLNA (Server) function.
(
54)
Home Network function
You can switch between enable/disable of
the DLNA (Server) and DMR (Media
Renderer) function.
• If "On" is selected, "Power Save in
Standby" is fixed to "Off". (
Setting device name
It is also possible to change the name of
this unit on the network.
• Select from a preset list
Select the preset name, then press
[OK].
• Create name
Enter the name.
Refer to "Entering text". (
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
64)
• Manual:
Only registered devices can access this
unit.
Remote device list
• To register equipment manually
1 Select the device name or the MAC
2 Select "Yes", then press [OK].
• To deregister equipment
1 Select the registered equipment,
2 Select "Yes", then press [OK].
• This function cannot be enabled when
"Automatic" is selected in "Registration type for
remote devices". (
• The maximum number of equipment that can be
registered is 16.
Address for the device you want to
register, then press [OK].
then press [OK].
above)
73)
77)
Advertisement
Table of Contents
