Table of Contents
Advertisement
Main unit
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
3 CALL LED
• The LED will light up when this unit receives
incoming call etc. of the video
communication. (
4 Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
5 Start PAUSE LIVE TV (
6 USB port
7 SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
8 Channel select (
22)
9 Start recording (
26)
: Stop
; Start play
USB memory
SD card
61)
24)
Pull to flip down
the front panel.
< Display
HDDSD
3 4
1 SD card slot indicator
2 Copying indicator
3 Drive (HDD or SD) indicator
4 Remote control signal indicator
5 Main display section indicator
- Current time
- Playback counter
- Various messages (
6 Playback indicator
7 USB port indicator
8 Timer recording indicator
• This indicator lights up when the timer
recording standby is activated.
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
Getting started
1
2
COPY
SD USB
PLAY
5
6 7
83)
VQT4G61
8
11
Advertisement
Table of Contents
