Table of Contents
Advertisement
Convenient functions
Changing the unit's settings (Setup)
Dolby Digital
MPEG
Select the audio signal to output.
• Select "PCM" when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
• When using the DIGITAL AUDIO OUT terminal, there
are following restrictions on Dolby Digital.
- When "PCM" is selected, audio is output as
Down-mixed 2ch PCM.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio Type for Digital Broadcast
If the programme has more than one track
(Dolby Digital, MPEG, etc.), you can set
priorities.
• This setting will give effect in the following
conditions.
- The default setting when watching
broadcasts.
- The default setting when playing back the
title.
Display
On-Screen Information
Select the time until the channel information
screen (
23) disappears automatically.
Unit's Display
Changes the brightness of the unit's display.
Screen Saver
This is to prevent burn-in on the screen.
Teletext
Select the Teletext (
70
VQT4G61
24) display mode.
Connection
3D Settings
3D Type
If 3D video cannot be played back in 3D, you
may be able to play it in 3D by changing the
setting.
• Change the settings for 3D on the TV also
when "Side by side" is selected.
3D AVCHD Output
If 2D AVCHD video is recognised as 3D video
and cannot be played back correctly, you may
be able to play it by changing the setting.
3D Playback Message
Set to display or hide the 3D viewing warning
screen.
TV Aspect
Set to match the type of TV connected.
• Pan & Scan:
Side picture is trimmed for 16:9
picture.
The pictures may be shown in
the letterbox style depending
on the content.
• Letterbox:
Black bands appear for 16:9
picture.
Aspect for 4:3 Video
To play a 4:3 title, set how to show pictures on a
16:9 TV.
TV System
Set in accordance with the TV System for the
connected TV.
Advertisement
Table of Contents
