Recording Still Images - Canon DC100 Instruction Manual

To use the still images functions, you will need to set [STILL IMAGES] to [ON]
beforehand (CD 11).
I
To change the operating mode, refer to About the Operating Modes
(CD
11).
1. Open the LCD panel and the lens
cover (move the lens cover switch
down to CS;).
2. Press
:111,lllllli!lllliill~11
halfway.
Once the focus is automatically adjusted,
o
will turn green and one or more AF
frames appear.
3. Press fully.
The DISC access indicator will flash as
the image is being recorded.
@
®
J. J....
26
Avoid the following actions while the disc access display
~
@ appears and while
the DISC access indicator is on or flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to vibrations or strong impacts.
- Do not open the disc cover and do not remove the disc.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the operating mode.
If the subject is not suitable for autofocus, 0 turns yellow. Keep
l.ll~lil'lilllll
pressed halfway and adjust the focus manually with the multi selector
(~~).