Canon DC100 Instruction Manual page 46

Using the Self Timer
I
46
To change the operating mode, refer to About the Operating Modes (CD 11).
(CAMERA·~IJ!) :
Set the camcorder in record pause mode.
¢I
~ CAMERA SETUP
.Q.
I
SELF TIMER
¢:II
ON
~
"
~
" appears.
~GAIVIERI~~IJ!)
:
Press
~!111111;'III;lllllllil
The camcorder starts recording after a 10-second countdown. The countdown appears
on the screen.
(CAMERA7E1J :
Press , first halfway to activate the autofocus and then fully
to record the still image.
The camcorder will record the still image after a 10-second countdown. The countdown
appears on the screen.
_ Once the countdown has begun, you can also press •. . . . . . . to cancel the
d
self timer. The self timer will be canceled if you turn off the camcorder.