System Setup (Volume, Beep, Etc.) - Canon DC100 Instruction Manual

I
DEMO MODE
I
CCIMERI'~!!) CC.~Rli.)
[mON], [mil OFF]
The demonstration mode displays the camcorder's main features. It starts automatically
when the camcorder is powered with the power adapter if yqu leave it turned on without
loading a disc for more than 5 minutes.
o
To cancel the demo mode once it started, press any button, turn off the camcorder or
load a disc.
~
SYSTEM SETUP
, ' ,
.
1 - 1
S_T_IL_L_I_M_A_G_E_S ----' ,
(CIM~RA.
• • .
~
• • • • •
~ !!
• • • • ) CCIME8.A i
)
(P~A¥;
• •
· ~!!
• • )
[OON], [mil OFF]
I_V_O_L_U_M_E
---' I
(~LIY+~!!)
(OJ 29)
1l1)~1l1~
(OJ 11)
36
I
BEEP
I
(CAMERI·i~!!)
(CAMERI·Ii)
tPLAI·i~
.• )
[1111») HIGH VOLUME], [1111> LOW VOLUME], [mil OFF]
A beep will accompany some operations like turning on the camcorder, the self-timer
countdown, etc. It also serves as a warning beep under unusual conditions.
I
FIRMWARE
I
(el..l¥~.)
You can check the current version of the
camcorder'~
firmware.
I
POWER SAVE
ICCAMERA.·!!) (CAMERA-°Di)
[m ON], [mil OFF]
In order to save power when the camcorder is powered by a battery pack, it will
automatically shut off if left without any operation for five minutes. Approximately 30
seconds before the camcorder shuts off, the message" &AUTO POWER OFF" will
appear.
I
FILE NOS.
I
(CAIVIERA~Eli)
[E3 RESET],
[=
CONTINUOUS]
Select the image numbering method to be used on a new disc.
Images are automatically assigned consecutive image numbers from 0101 to 9900, and
stored in folders containing up to 100 images. Folders are numbered from 101 to 998.
[RESET]: Image numbering will start anew from 101-0101 every time you insert a new
disc. If it already contains image files, a new image will be given the number following that
of the last image on the disc.
[CONTINUOUS]: Image numbering will start from the number following that of the last
image recorded with the camcorder. If the disc already contains an image with a larger
image number, a new image will be given the number following that of the last image on
the disc. This numbering method is useful for organizing images on a computer. We
recommend using this setting.