Service; Accessories - Porter-Cable 3700L Instruction Manual

KEEP TOOL CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth.
NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
Wear ANSI Z87.1 safety glasses while using compressed air.
FAILURE TO START
Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet.
Also, check for blown fuses or open circuit breakers in the line.
LUBRICATION
This tool has been lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal
operating conditions. No further lubrication is necessary.
BRUSH INSPECTION
For your continued safety and electrical protection, brush inspection and replacement on this tool should ONLY be
performed by an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER-CABLE•DELTA FACTORY SERVICE
CENTER.
At approximately 100 hours of use, take or send your tool to your nearest authorized Porter-Cable Service Station to
be thoroughly cleaned and inspected. Have worn parts replaced and lubricated with fresh lubricant. Have new brushes
installed, and test the tool for performance.
Any loss of power before the above maintenance check may indicate the need for immediate servicing of your tool. DO
NOT CONTINUE TO OPERATE TOOL UNDER THIS CONDITION. If proper operating voltage is present, return your tool
to the service station for immediate service.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our website at servicenet.porter-cable.
com. You can also order parts from your nearest factory-owned branch, or by calling our Customer Care Center at 1-
888-848-5175 to receive personalized support from highly-trained technicians.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For
factory-owned branches, or an Authorized Warranty Service Center, visit our website at www.porter-cable. com or
call our Customer Care Center at (888)-848-5175. All repairs made by our service centers are fully guaranteed against
defective material and workmanship. We cannot guarantee repairs made or attempted by others.
You can also write to us for information at PORTER-CABLE, 4825 Highway 45 North, Jackson, Tennessee 38305
- Attention: Product Service. Be sure to include all of the information shown on the nameplate of your tool (model
number, type, serial number, etc.).
A complete line of accessories is available from your Porter-Cable•Delta Supplier, Porter-Cable
Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable. com for a catalog
or for the name of your nearest supplier.
Since accessories other than those offered by Porter-Cable•Delta have not been tested with this
product, use of such accessories could be hazardous. For safest operation, only Porter-Cable•Delta recommended
accessories should be used with this product.
(If applicable)

ACCESSORIES

SERVICE

21
information about Porter-Cable, its
Delta Factory Service