Playing A Usb Device; Playing Back Audio Files Stored On A Usb Memory Device - Pioneer VSX-LX52 Operating Instructions Manual

05 Basic playback

Playing a USB device

It is possible to playback files
the front of this receiver.
1 Switch on the receiver and your TV.
See Connecting a USB device on page 36.
2 Press iPod USB on the remote control to switch the
receiver to the iPod/USB.
Loading appears in the GUI screen as this receiver starts
recognizing the USB device connected.
display shows USB Top menu you're ready to playback
from the USB device.
• Main Zone:
• Sub Zone:
Important
If an Over Current message lights in the display, the
power requirements of the USB device are too high for
this receiver. Try following the points below:
• Switch the receiver off, then on again.
• Reconnect the USB device with the receiver switched
off.
• Use a dedicated AC adapter (supplied with the
device) for USB power.
If this doesn't remedy the problem, it is likely your USB
device is incompatible.
Note
1 • Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and digital audio players
(MP3 players) of format FAT12/16/32. It is not possible to connect this unit to a personal computer for USB playback.
• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for
any loss of data that may occur when connected to this receiver.
2 Make sure the receiver is in standby when disconnecting the USB device.
3 • When a USB memory device with a large capacity is connected, it may take some time to read all the contents.
• This receiver does not support a USB hub.
4 Note that characters that cannot be displayed on this receiver are displayed as #.
5 • If the file selected cannot be played back, this receiver automatically skips to the next file playable.
• When the file currently being played back has no title assigned to it, the file name is displayed in the GUI screen instead; when neither the
album name nor the artist name is present, the row is displayed as a blank space.
• Playback stops when the last song in a USB memory device is played back to the end.
• Copyrighted audio files cannot be played back on this receiver.
• DRM-protected audio files cannot be played back on this receiver.
46
En
1
using the USB interface on
2
3
When the
USB Top
A/V RECEIVER
Music
Photos
Slideshow Setup
1 / 3
USB Top
[ Music ]
[ Photos ]
[ Slideshow Setup ]
1/3
Playing back audio files stored on a USB
memory device
The maximum number of levels that you can select in
Step 2 (below) is 8. Also, you can display and play back up
to 30 000 folders and files within a USB memory device.
Use / to select 'Music' from the USB Top menu.
1
USB Top
A/V RECEIVER
Music
Photos
Slideshow Setup
1 / 3
Use / to select a folder, then press ENTER to
2
browse that folder.
• To return to the previous level any time, press RETURN.
3 Continue browsing until you arrive at what you
want to play, then press  to start playback.
• Main Zone:
Track number
Track title or File name
Track Title
Top Menu
PLAY 3:02 -2:02
Artist Name
xxxx/xxxx
Album Title
USB
Now Playing
Genre : xxxxxxxxxxx
Format : xxxxxxxxxxx
Bit Rate : xxxxxxxxxxx
• Sub Zone:
Track title or File name
Play
xxxx/xxxx
Track Title
Random On
3:02
Artist Name
Album Title
Music
Top Menu
A/V RECEIVER
Folder1
Folder2
Folder3
Music1
Music2
Music3
Music4
Music5
1 / 9
Return
5
Playing time
Play mode
Random On
Artist name
Album title
File information
Return
Track number
Play mode
Playing time
-2:02
Artist name
Album title
4