Factory Defaults - Samsung SCP-3430 User Manual

setup
Language
Select <LANGUAGE> and use the left/right
button to select a preferred display language.

FACTORY DEFAULTS

When selected, the <FACTORY DEFAULTS>
screen appears and you can reset all settings
to the factory default settings by selecting
the <OK>. However, the protocol, baud rate,
address and the language settings will not be
reset.
M
OSD COLOR
Selects the color of the on-screen display font.
PROPORTIONAL P/T
When selected <ON>, manual pan / tilt movement speed will vary proportionally to
the zoom ratio.
P/T SPEED
When selected <ON>, manual pan / tilt movement speed will be doubled.
46_ setup
Z6806125501A-SCP-3430(P)-ENGLISH46 46 Z6806125501A-SCP-3430(P)-ENGLISH46 46

Note that the resetting the system to the
factory default will erase all settings data.
OTHER SET OTHER SET
LANGUAGE LANGUAGE
FACTORY DEFAULTS FACTORY DEFAULTS
OSD COLOR OSD COLOR
PROPORTIONAL P/T PROPORTIONAL P/T
P/T SPEED P/T SPEED [2] [2]
AUTO CAL. AUTO CAL.
D-FLIP D-FLIP
PASSWORD PASSWORD
FACTORY DEFAULTS FACTORY DEFAULTS
OK OK
CANCEL
ENGLISH ENGLISH
BW BW
ON ON
OFF OFF
OFF OFF
OFF OFF
2010-05-04 오후 2:37: 2010-05-04 오후 2:37: