Pattern Setup - Samsung SCP-3430 User Manual

Z6806125501A-SCP-3430(P)-ENGLISH39 39 Z6806125501A-SCP-3430(P)-ENGLISH39 39
3. Select each item and set appropriately.
POSITION : Set the starting and ending
positions for the <AUTO PAN>.
Move to the setting screen and adjust
pan/tilt to the desired starting position,
and then press [ENTER].
Again, adjust pan/tilt to the desired
ending position and press [ENTER] to
fi nish <AUTO PAN> setup.
DIRECTION : Sets the direction of the camera's movement from the starting to
the end position. (Based on panning)
<RIGHT>
START
ENDLESS : Instead of shuttling between start and end positions, the camera
turns 360° endlessly while stops for the <DWELL TIME> at both positions.
SPEED : Sets the moving speed of the camera, from 1 to 64.
DWELL TIME : Sets the dwell time at the starting and ending positions, from
1 to 60 seconds.

Pattern Setup

You can manually record your pan/tilt/zoom movements to a monitoring pattern for
up to 2 minutes.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
1. Select <MAIN MENU>-<AUTO SET>.
2. Select the pattern number.
PATTERN setup screen appears.
3. Select the <POSITION> and set the
pattern's starting position and press
[ENTER].
POSITION
DIRECTION DIRECTION
ENDLESS ENDLESS
SPEED SPEED
DWELL TIME DWELL TIME
<LEFT>
START
END
<POSITION>
START START
AUTO PAN 1 AUTO PAN 1
LEFT LEFT
OFF OFF
[10] [10]
3SEC 3SEC
END
PATTERN SET 1 PATTERN SET 1
English _39
2010-05-04 오후 2:37: 2010-05-04 오후 2:37: