Table of Contents
Advertisement
installation & connection
To connect ALARM IN
1.
2.
To connect ALARM OUT
1.
2.
To connect the controller
Connect an external controller or DVR to the camera, with which you can adjust the
camera.
1.
2.
3.
4.
18_ installation & connection
Z6806125501A-SCP-3430(P)-ENGLISH18 18
Z6806125501A-SCP-3430(P)-ENGLISH18 18
Connect one end of the external device's signal line to a corresponding ALARM
IN port of the monitor.
Connect the other end of the signal line to the earth-grounding [GND] port.
Connect one end of the external device's signal line to a corresponding ALARM
OUT port of the monitor.
Connect the other end of the signal line to the common [COM] port.
Connect the Rx+ pin of the
camera to the Tx+ pin of the
controller.
Connect the Rx- pin of the
camera to the Tx- pin of the
controller.
Connect the Tx+ pin of the
camera to the Rx+ pin of the
controller.
Connect the Tx- pin of the
camera to the Rx- pin of the
controller.
Rx
Tx
2010-05-04 오후 2:37:
2010-05-04 오후 2:37:
Hide quick links:
Advertisement
Table of Contents
