Adding A Hub; Relocating The M7 - Samsung WAM750 User Manual

Adding a HUB

A
An M7 and a HUB may not pair successfully if the M7 and HUB are too far apart or are on
different floors.
In such cases, you can link two HUBs together by setting the second HUB to Repeater mode.
The additional HUB amplifies the signal and lets you pair the M7 to the closest HUB.
Set the HUB that is connected to the wireless router
1
to Pairing mode by pressing its
second.
Plug in the new HUB you are using as an extender,
2
and then press its
The newly added HUB's LED indicators turn off and
3
on, and it switches to Repeater mode.
Once the connection between the two HUBs has been
4
established, the added HUB's (
blinking.
NOTES
9 If your smart device is not connected to the wireless router
with a Wi-Fi connection, the M7 will not appear on the
Samsung Multiroom app.
9 Place the HUB that is in Repeater mode in an appropriate
location between the M7 and the HUB that is connected to the wireless router.
9 You can set only one HUB to Repeater mode.

Relocating the M7

A
When relocating your M7, refer to the below table.
Wireless router
HUB
Without a HUB
With a HUB
SPK Add
SPK Add
button for 10 seconds.
If you want to connect your M7 to the
current wireless router.
Turn off the M7, relocate it and then turn
it on.
button for 1
) indicator stops
If you want to connect your M7 to a
Turn off the M7, relocate it, then establish
the new connection as described in the
installation instructions on pages 23
through 35.
Connect a LAN cable between the HUB
and the new wireless router, turn on the
HUB, and then turn on the M7.
4444 46
M7
Used as a
extender
HUB
different wireless router.
Press here