Wall Mounting - Amcor D850E Instruction Manual

POSITIONING THE DEHUMDIFIER
There must be free space of at least 30 cm between any other object and the front
and the top of the unit.
Your Amcor dehumidifier can be installed in any area with a too high relative
humidity, such as cellar, playing area, shed, archive or swimming pool.
The dehumidifier will begin to protect from the harmful effects of excess moisture
as soon as it is plugged in and switched on.
When positioning your Amcor dehumidifier, ensure that it is placed on a level
surface.
Best results are obtained when windows and doors are closed, thus preventing the
possible influx of fresh, too humid, air.
When the unit is placed in a (swimming) pool, connect to the mains via a
transformer or a breaking switch, conform the local regulations regarding electrical
installations.
When the dehumidifier is in operation, open outside doors and windows only when
necessary.

WALL MOUNTING

See page 4, fig. 5
The unit can stand on the floor or hung on a wall. All necessary items for wall
mounting are supplied in the plastic bag.
• Fix the supporting bracket with at least 5 screws horizontally to the wall, use the
plugs for better fastening.
• Hang the unit on the bracket, the two tongues fit into the slots on the unit's rear
panel.
• Make sure the two rubber pads (3) on the tongues and the two rubber
supports (4) on the lower part of the rear panel are properly placed.
GB
5