Operation Instructions; Ignition Switch/Steering&Handlebar Lock - KYMCO Agility 50 Driver Manual

3. OPERATION INSTRUCTIONS

3. OPERATION INSTRUCTIONS
(1) IGNITION SWITCH/STEERING&HANDLEBAR LOCK (1) IGNITION SWITCH/STEERING&HANDLEBAR LOCK
ON : At this position, power is connected to start the ON : At this position, power is connected to start the
engine. The key cannot be taken out. engine. The key cannot be taken out.
OFF OFF
: At this position, power is cut off and the engine : At this position, power is cut off and the engine
stops. The key can be taken out. stops. The key can be taken out.
LOCK : At this position, the steering handlebar is locked. LOCK : At this position, the steering handlebar is locked.
The key can be taken out The key can be taken out
Locking Method Locking Method
Turn the steering handlebar left to the full and then push Turn the steering handlebar left to the full and then push
and turn the ignition switch key left to the "LOCK" position and turn the ignition switch key left to the "LOCK" position
,the handlebar can be locked. ,the handlebar can be locked.
Unlocking Method Unlocking Method
Turn the ignition switch key right to the"OFF" and the Turn the ignition switch key right to the"OFF" and the
"LOCK" is released automatically. "LOCK" is released automatically.
CAUTION:
After locking, turn the handlebar gently to make sure After locking, turn the handlebar gently to make sure
that it is locked. that it is locked.
Do not turn the ignition switch to the"LOCK" Position Do not turn the ignition switch to the"LOCK" Position
during riding, otherwise the handlebar will be out of during riding, otherwise the handlebar will be out of
control and cause accidents. control and cause accidents.
Don't park your motorcycle at a place to hinder the traffic. Don't park your motorcycle at a place to hinder the traffic.
－ － － －
4 4
ON
OFF
OFF