Table of Contents
Advertisement
(4) BATTERY
(4) BATTERY
This model adopts the battery which needs no refilling of
This model adopts the battery which needs no refilling of
Distilled water.
Distilled water.
When cleaning the battery terminals, remove the screws
When cleaning the battery terminals, remove the screws
Attaching the battery cover on the seat and then open
Attaching the battery cover on the seat and then open
the battery cover.
the battery cover.
When battery terminals are corroded, take out the battery
When battery terminals are corroded, take out the battery
for cleaning.
for cleaning.
After cleaning, apply a thin coat of grease or Vaseline to
After cleaning, apply a thin coat of grease or Vaseline to
Battery terminals and then install the battery.
Battery terminals and then install the battery.
CAUTION:
Never open the closed-type battery electrolyte cap.
Never open the closed-type battery electrolyte cap.
If the motorcycle will not be used for a long time, the
If the motorcycle will not be used for a long time, the
Battery will discharge electricity by itself. Remove the
Battery will discharge electricity by itself. Remove the
Battery and put it in a cool place after it is fully charged to
Battery and put it in a cool place after it is fully charged to
Prevent electricity leakage.
Prevent electricity leakage.
If the motorcycle will not be used for a long time,remove
If the motorcycle will not be used for a long time,remove
the negative(-)ter minal.
the negative(-)ter minal.
Do not smoke or allow flames or sparks near the battery
Do not smoke or allow flames or sparks near the battery
While removing and installing it.
While removing and installing it.
Turn off the ignition switch before removal or installation.
Turn off the ignition switch before removal or installation.
The negative (-) terminal shall be removed first and the
The negative (-) terminal shall be removed first and the
Positive (+) terminal shall be installed first.
Positive (+) terminal shall be installed first.
Tighten the loose terminal nuts securely.
Tighten the loose terminal nuts securely.
－
－
－
－
30
30
Battery Charger
Hide quick links:
Advertisement
Table of Contents
