EverFocus ELR-4 Instruction Manual page 62

HD Failure:
Figure 5-13 Alarm & Event Menu – Event - HD Failure
Log: Check box to record events in the log.
Buzzer: Check box to enable buzzer when no hard drive is detected.
Email Notify: Check box to enable email notification function when HD fails.
Network Alarm: Check box to send out a network alarm to client PC. (requires PowerCon software and
setting up Alarm Server in Network Setup menu).
Alarm Output: This will transmit a signal through one of the alarm outputs. It can be set to either "NONE"
(not active) or "1".
Output Type: Output action is locked to Transparent.
55