Pioneer DEH-P1Y Installation Manual page 6

Power cable connection (2) (Fig. 11)
31. When using this unit at 60W × 4ch and the accessory fuse for the vehicle is less than 10A.
32. Power supply wiring kit "RD-221" (sold separately)
33. Fuse (1A)
3. This product
13. Red
To electric terminal controlled
by ignition switch (12 V DC)
34. Relay
ON/OFF.
8. Multi-CD player
(sold separately)
30. Black (ground) 30. Black (ground) 13.
To vehicle (metal) body. To vehicle (metal) body.
35. Red
Power is supplied to this
terminal when the ignition
key is in the ACC or ON
position.
39. Red
To separately sold power supply wiring
kit (RD-221).
36. Yellow
Power is always supplied
to this terminal.
37. Fuse
40. Yellow
(20 A)
To separately sold power supply wiring
kit (RD-221).
38. For more detail, please refer to RD-221
owner's manual.
15. Orange/white
To lighting switch terminal.
5. 15 cm
6. Antenna jack
4. Refer to Fig. 10.
7. IP-BUS input
(Blue)
16. Blue/white
To system control terminal of the power amp or
9. IP-BUS cable
Auto-antenna relay control terminal (max. 300
mA 12 V DC).
Red
To electric terminal controlled
by ignition switch (12 V DC)
17. With a 2 speaker system, do not connect
ON/OFF.
anything to the speaker leads that are not
connected to speakers.
14. Fuse resistor
22. White
+
18.
Front speaker
12. Fuse holder
≠
25. Gray/black
23. White/black
19. Left
26. Green
21. +
Rear speaker
or Subwoofer
≠
12. Fuse holder
27. Green/black 29. Violet/black
10. Yellow/black
If you use a cellular telephone, connect it
via the Audio Mute lead on the cellular
telephone. If not, keep the Audio Mute
lead free of any connections.
Connecting to separately sold power amp (Fig. 12)
6. Antenna jack
5. 15 cm
3. This product
8. Multi-CD player
(sold separately)
9. IP-BUS cable
24. Gray
44. Refer to Fig. 8 and Fig. 9.
+
18.
Front speaker
≠
20. Right
28. Violet
+ 22.
Rear speaker +
18.
or Subwoofer
≠
Front speaker
≠
23. White/black
19. Left
21.
+
Rear speaker
or Subwoofer
≠
27. Green/black
41. Front output
(FRONT OUTPUT)
42. Rear output
(REAR OUTPUT)
43. Subwoofer output or Non Fading Output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
7. IP-BUS input
(Blue)
16. Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300
mA 12 V DC).
18.
Front speaker
22. White 24. Gray
+
18.
Front speaker
≠ 48.
25. Gray/black
Rear speaker
20. Right
26. Green 28. Violet
21. 19. Left
+
Rear speaker
49.
or Subwoofer
Subwoofer
≠
29. Violet/black
17. With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
46. Power amp
(sold separately)
46. Power amp
(sold separately)
45. Connecting cords
with RCA pin plugs
(sold separately)
46. Power amp
(sold separately)
47. System remote control
+ +
18.
Front speaker
≠ ≠
+ +
48.
Rear speaker
≠ ≠
20. Right
+ +
49.
Subwoofer
≠ ≠
51. Note:
50. Perform these connections when using the
Change the initial setting of this unit (refer
optional amplifier.
to the Operation Manual). The subwoofer
output of this unit is monaural.