TP-Link TL-PA6030 User Manual page 28

Join an existing secured powerline network:
Powerline adapter A and powerline adapter B form a HomeplugAV network. Powerline adapter C wants
to join this network.
Step 1. Press and hold the Pair button on powerline adapter C for one second.
Step 2. Within 2 minutes, press and hold the Pair button on powerline adapter A/B for one second.
Step 3. Wait for about 60 seconds while your powerline adapters are connecting. The Power LED on
powerline adapters A/B and C will stop flashing and become solid light when the connection is
made.
Note:
The sequence of Step 1 and Step 2 can be exchanged.
Leave an existing secured powerline network:
As the figure above shown, powerline adapters A, B and C have formed a HomeplugAV network. The
user wants to remove one device (powerline adapter A) from this network.
Step 1. Press and hold the Pair button on powerline adapter A for at least 10 seconds. Powerline
adapter A will reset and restart. (The Power LED of powerline adapter A will momentarily
extinguish during resetting, flash during restarting then illuminate steadily.)
Step 2. Wait for the reset to complete.
TL-PA6030 AV600 3-port Powerline Adapter
22