Chapter 3 Installing Management Utility - TP-Link TL-PA6030 User Manual

Chapter 3 Installing Management Utility

Please verify that no other powerline adapter or any Encryption Management Utilities are installed
before installing the provided software. If other Powerline Utilities are installed, uninstall them and restart
your personal computer before installing this provided software.
Note:
To install PowerLine Utility, please make sure WinPcap (version 4.1.2 or higher) has been installed in
your computer. Otherwise, a window will pop up for you to install WinPcap 4.1.3.
Take the following procedures to properly install the provided Management Utility:
Step 1: Insert the Resource CD into your CD-ROM drive, and then the following Setup Wizard will
automatically pop up on your computer's screen.
Step 2: Choose TL-PA6030, select 600Mbps Powerline and click Management Utility, and then the
program installation process will carry out and copy all the necessary files to your system.
TL-PA6030 AV600 3-port Powerline Adapter
9