Quick Installation Guide
AV600 3-port Powerline Adapter
MODEL NO.
1
LED and Button Descriptions
Item
Status
Solid
The adapter is on.
Power LED
Blinking The adapter is in pairing procedure.
O
The adapter is o .
Solid
The adapter is connected to a powerline network.
Blinking The adapter is transferring data.
Powerline LED
O
The adapter isn't connected to any powerline network.
At least one Ethernet port is connected, but there is no
Solid
data being transferred.
Ethernet LED
Blinking At least one Ethernet port is transferring data.
O
No Ethernet port is connected.
Item
Pair button is used to secure a powerline network. To secure
Pair Button
your network, please refer to Appendix: Using the Pair Button.
TL-PA6030
Power LED
Powerline LED
Ethernet LED
Ethernet Ports
Pair Button
Description
Description
Package Contents
Powerline Adapter
*
Resource CD
(For Windows Only)
* The provided power plug may di er from the picture due to di erent regional
power speci cations. Here we take the EU version as an example.
Warning on Final Location
NOTE: It's strongly recommended that you plug the adapter directly into the
wall socket, for some power strips have surge protector which can lter data.
2
Network Installation
TP-LINK powerline adapters are Plug and Play. After taking the steps above,
you can surf the Internet.
To add another adapter
Plug an additional adapter into the wall socket, and the connection will be
established automatically within 60 seconds.
NOTE:
1. To surf the Internet, please make sure that your router is properly
connected to the Internet.
2. If the adapters fail to automatically link to each other, you can
establish a private network by using the pair button. To set up a
private network, please go to Appendix: Using the Pair Button
for detailed instructions.
AV600 3-port Powerline Adapter
TL-PA6030
QIG
Ethernet Cable