Toshiba 47VL800A Owner's Manual page 59

IP Address Setup
Auto Setup:
1
From the Preferences menu, select Network
Setup and press OK �
2
Press s or r to select Advanced Network Setup ,
and press OK �
Network Setup
Network Type
Wireless Setup
Advanced Network Setup
3
Press s or r to select IP Address Setup , and
press OK �
Advanced Network Setup
IP Address Setup
DNS Setup
MAC Address
4
Select Auto Setup and press v or w to select On �
IP Address Setup
Auto Setup
IP Address
Subnet Mask
Default Gateway
Note:
Other items will be greyed out when Auto Setup is
set to On.
Manual Setup:
1
From the Preferences menu, select Network
Setup and press OK �
2
Press s or r to select Advanced Network Setup ,
and press OK �
3
Press s or r to select IP Address Setup , and
press OK �
4
Select Auto Setup and press v or w to select Off �
5
Press s or r to select IP Address �
6
Press v or w to select the field you want to change
and use the number buttons to input the IP address� To
save the setting, press OK �
Note:
IP address field numbers must be between
0 and 255. After each field number has been
set, press OK to store the entire address. If the
entire IP Address is invalid, a warning message
will appear after OK is pressed.
7
Press s or r to select Subnet Mask , and edit in the
same way as IP Address�
8
Press s or r to select Default Gateway , and edit
in same way as IP Address �
Connecting your TV
Wired
On
. . .
. . .
. . .
Note:
If you manually set the IP address, you must not use
the same IP address for any other device. The IP
address you use should be a private address.
DNS Setup
When the DHCP function of the router connected to this
TV is Off, set Auto Setup to Off , and manually set the
DNS address(es). Your internet service provider should
have provided these to you�
Auto setup:
1
From the Preferences menu, select Network
Setup and press OK �
2
Press s or r to select Advanced Network Setup
and press OK �
3
Press s or r to select DNS Setup and press OK �
4
Select Auto Setup and press v or w to select On �
Note:
Other items will be greyed out when Auto Setup is
set to On.
Manual setup:
1
From the Preferences menu, select Network
Setup and press OK �
2
Press s or r to select Advanced Network Setup
and press OK �
3
Press s or r to select DNS Setup and press OK �
4
Select Auto Setup and press v or w to select Off �
5
Press s or r to select Primary DNS Address �
6
Press v or w to select the field you want to change
and use the number buttons to input the Primary DNS
Address� To save the setting, press OK �
Note:
DNS address field numbers must be between
0 and 255. If you input an incompatible number
and press OK, the field number will reset to the
previous value.
7
Press s or r to select Secondary DNS Address ,
and edit in the same way as Primary DNS Address�
MAC Address
You can view the fixed MAC address for the TV .
1
From the Preferences menu, select Network
Setup and press OK �
2
Press s or r to select Advanced Network Setup
and press OK �
59